Europa League product parameters

Location:Home>>News>>Europa League product parameters>>PFCAT die type reinforcing machine electric applia...

PFCAT die type reinforcing machine electric appliance

Author:admin Time:2017-07-21

I. rack
1 industrial computer (including monitor, keyboard, mouse, etc.)
2 computer fan (220V 5) (4)
3 spiral worm pump (220V370W) 1
4 reversing valve 1
5 frequency converter 1 (equipped with rotary worm pump)
6 power master switch 1
7 vacuum pump 1 (power supply 220V)
8 one-way solenoid valve 2
9 more than 1 hole socket
10 air pressure control valve 1
Two, top cover
1 emergency stop switch 1
2 tricolor lamp 1
3 power switch button 1
4 start button 1
5 reset button 1
6 peak buzzer 1
7 fluorescent lamp 1
Three and X axis
1 X axis servo motor (400W ball screw guide 20mm) (X left axle)
2 X axis U type photoelectric sensor (PM-T64) origin (X left axis)
3 X axis type U photoelectric sensor (PM-T64), left limit (X left axis)
4 X axis servo motor (400W) (X right axle)
5 X axis U type photoelectric sensor (PM-T64) origin (X right axis)
6 X axis, type U photoelectric sensor (PM-T64), right limit (X, right axis)
7 X axis U type photoelectric sensor (PM-T64) anti-collision limit
Four and Y axis
1 Y axis servo motor (400W ball screw, guide 20mm) 1 (Y axis)
2 Y axis, type U photoelectric sensor (PM-T64), 1 origin
3 Y axis U type photoelectric sensor (PM-T64), front limit 1
4 Y axis type U photoelectric sensor (PM-T64), 1 limit
5 heating pipe 8 (phi 6X100W)
6 digital temperature controller 1 (platform temperature 70~110)
7 temperature sensor 1
Five and Z axis
1 Z axis servo motor (100W) (left axle)
2 Z axis U type photoelectric sensor (PM-T64) origin (left axis)
3 vacuum valve assembly (suction) (left axle)
4 solenoid valve 1 (suction) (left axis)
5 solenoid valve 1 (blowing) (left axis)
6 cylinder magnetic induction (CDU25-15D) upper limit (left axis)
7 cylinder magnetic induction (CDU25-15D) lower limit (left axis)
8 solenoid valve 1 (cylinder CDU25-15D) (left axis)
9 digital pressure switch (ZSE30A) 1 (left axis)
10 Z axis servo motor (100W) (right axis)
11 Z axis U type photoelectric sensor (PM-T64) origin (right axis)
12 vacuum valve assembly (suction) (right axis)
13 solenoid valve 1 (suction) (right axis)
14 solenoid valve 1 (blowing) 1 (right axis)
15 cylinder magnetic induction (CDU25-15D) upper limit 1 (right axis)
16 cylinder magnetic induction (CDU25-15D) lower limit 1 (right axis)
17 solenoid valve 1 (cylinder CDU25-15D) (right axis)
18 digital pressure switch (ZSE30A) 1 (right axis)
Six, mold
1 punching die servo motor (750W ball screw, guide 25mm, reducer 1:3) 1 (left)
2 U type photoelectric sensor (PM-T64) blanking limit (left)
3 U type photoelectric sensor (PM-T64) cut the origin (left)
4 punch suction solenoid valve 1 (suction) (left)
5 punch blow solenoid valve 1 (blowing) (left)
6 digital pressure switch (ZSE30A) 1 (left)
7 feed stepper motor 57 type 1 (left)
8 punching die servo motor (750W ball screw, guide 25mm, reducer 1:3) 1 (right)
9 U type photoelectric sensor (PM-T64) blanking limit (right)
10 U type photoelectric sensor (PM-T64) punch cut origin (right)
11 punch suction solenoid valve 1 (suction) (right)
12 punch blow solenoid valve 1 (blowing) (right)
13 digital pressure switch (ZSE30A) 1 (right)
14 feed stepper motors, type 1, 57 (right)
Seven 、 material release
1 proximity sensor (GL-18H) discharge with 1 (left discharge)
2 torque motor (1:30) 1 (left material)
3 governor (torque motor) 1 (left feed)
4 solenoid valve (air rise shaft) 1 (left feed)
5 proximity sensor (GL-18H) discharge with 1 strips (left feed)
6 close to the sensor (GL-18H), receive the broken band 1 (left discharge)
7 torque motor (1:30) 1 (right feed)
8 governor (torque motor) 1 (right feed)
9 solenoid valve (air rise shaft) 1 (right feed)
10 proximity sensor (GL-18H) discharge with 1 strips (right feed)
11 close to the sensor (GL-18H), receive the broken band 1 (right feed)
Eight, phase
1 left Z axis ring light blue (24V) 1
2, left coaxial light source white light (24V) 1
3, left coaxial light source white light (24V) 1
4 camera power supply (24V) 3
5 control power supply
Nine, moving materials
1 step motor, type 1, 86 (upper feed)
2 U type photoelectric sensor (PM-T64) left limit (upper feed)
3 U type photoelectric sensor (PM-T64) origin (upward movement)
4 U type photoelectric sensor (PM-T64) right limit (upward moving material)
5 step motor, type 1, 86 (lower moving)
6 U type photoelectric sensor (PM-T64) left limit (downward moving material)
7 U type photoelectric sensor (PM-T64) origin (lower moving material)
8 U type photoelectric sensor (PM-T64) right limit (lower moving material)
9 cylinder magnetic induction (CDQ2B-25-20) upper limit (upward movement)
10 cylinder magnetic induction (CDQ2B-25-20) lower limit (upward movement)
11 cylinder magnetic induction (CDQ2B-25-40) upper limit (upward movement)
12 cylinder magnetic induction (CDQ2B-25-40) lower limit (upward movement)
13 cylinder magnetic induction (CDQ2B-25-40) upper limit (lower moving material)
14 cylinder magnetic induction (CDQ2B-25-40) lower limit (lower moving material)
15 solenoid valve 1 (cylinder CDQ2B-25-20) (upward movement)
16 solenoid valve 1 (cylinder CDQ2B-25-40) (upward movement)
17 solenoid valve 1 (cylinder CDQ2B-25-40) (lower moving material)
18 servo motors (400W, brake, ball screw, guide 2mm) 1 (platform lifting)
19 U type photoelectric sensor (PM-T64) upper limit (platform lift)
20 U type photoelectric sensor (PM-T64) origin (platform lift)
21 U type photoelectric sensor (PM-T64) lower limit (platform lift)
22 cylindrical proximity sensor (GX12MUB) platform, rack or not?
23 fiber amplifiers

销售欧先生
销售郑女士
if (1<2){ fanrengu(); }